Aquarium top and stand construction ideas
#1 Guest_dredcon_*
Posted 28 November 2006 - 10:29 PM
Anyone else have any cheap aquarium top ideas?
I am also looking for relatively inexpensive multi tank stand ideas (10's and 20's mostly)
Thanks
#2 Guest_nativeplanter_*
Posted 29 November 2006 - 10:16 AM
#3 Guest_Irate Mormon_*
Posted 29 November 2006 - 10:38 AM
#4 Guest_dredcon_*
Posted 29 November 2006 - 06:02 PM
Scavenged window screen will keep fishes from leaping out of the tanks. For multi-stand racks, I use 2x4's. Sometimes construction sites will have leftover bits of lumber that you can use. Right now I have about 30 ballasts (pulled from commercial lighting fixtures) that will eventually be used for hoods. I am always keeping my eyes open for anything that could even remotely be used for fish. Any place renovations are going on is a gold mine - you can score cabinets, sometimes MH fixtures, etc.
Stand made from 2x4's only? They are beginning construction one some apartments about 10 feet from my back door, maybe I can "acquire" some materials there.
#5 Guest_dsmith73_*
Posted 29 November 2006 - 07:29 PM
Scavenged window screen will keep fishes from leaping out of the tanks. For multi-stand racks, I use 2x4's. Sometimes construction sites will have leftover bits of lumber that you can use. Right now I have about 30 ballasts (pulled from commercial lighting fixtures) that will eventually be used for hoods. I am always keeping my eyes open for anything that could even remotely be used for fish. Any place renovations are going on is a gold mine - you can score cabinets, sometimes MH fixtures, etc.
Stand made from 2x4's only? They are beginning construction one some apartments about 10 feet from my back door, maybe I can "acquire" some materials there.
I made my racks from 2x4's as well. They work great.
#6 Guest_dredcon_*
Posted 29 November 2006 - 07:44 PM
#7 Guest_dsmith73_*
Posted 29 November 2006 - 08:14 PM
#8 Guest_Irate Mormon_*
Posted 30 November 2006 - 07:12 PM
You use screws to attach the cross beams to the legs? Do you brace the inside conors where the crossbeams attach to the legs?
I use the legs IN the inside corners. Regular wood or drywall screws do just fine - carriage bolts are overkill IMO.
#9 Guest_dsmith73_*
Posted 01 December 2006 - 07:36 AM
I use the legs IN the inside corners. Regular wood or drywall screws do just fine - carriage bolts are overkill IMO.
I can't necessarily argue with this. I had the fear of the scorn of my wife to encourage me to make these as indestructable as possible. And my legs were on the inside and used as corners as well.
#10 Guest_nativeplanter_*
Posted 01 December 2006 - 12:05 PM
I can't necessarily argue with this. I had the fear of the scorn of my wife to encourage me to make these as indestructable as possible. And my legs were on the inside and used as corners as well.
I don't think corners are necessary. If you look at wood deck designs, few have corners (except for the new hardware things that make life easier because they don't need nails).
But I would say not to use drywall screws for the main frame. They can be brittle and snap if overstressed. After all, they are only meant to hold up drywall!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users